A marine survey is not just a formality required by insurance. For us, survey day will be the point where the dream boat has to survive contact with reality. The listing photos, broker description, and first walkthrough may tell us whether we like a catamaran. The survey and sea trial help tell us whether we should actually own it.
We would hire an independent surveyor who works for us, not the broker or seller. Depending on the boat, we may also bring in separate rigging or engine specialists. No single person can be the deepest expert in every system on a modern cruising catamaran.
Before the Survey: Read Everything
We want maintenance records, invoices, equipment manuals, previous surveys if available, registration/documentation information, and a list of major upgrades before survey day. The more history we understand in advance, the more time the surveyor can spend investigating instead of identifying basic equipment.

Hulls, Bridgedeck, and Structure
With the boat hauled, the hulls become easier to inspect for impact damage, poorly repaired areas, blistering, cracking, delamination clues, moisture concerns, and unusual fairing. On a catamaran we also care about the bridgedeck, structural bulkheads, chainplate areas, and evidence of movement or stress.
No used boat is going to be visually perfect. The issue is not whether there is a crack in gelcoat somewhere. The issue is whether a symptom points to a structural problem, recurring water intrusion, collision damage, or a repair that was not done correctly.
Rudders, Saildrives, Props, and Through-Hulls
The haul-out is the time to inspect rudder bearings and movement, saildrive seals or shafts, propellers, anodes, raw-water intakes, transducers, and every through-hull below the waterline. We want to know which fittings are original, which have been replaced, and whether seacocks operate properly.
Decks, Hatches, and Water Intrusion
Water intrusion can become one of the most frustrating categories of boat ownership because the leak and the visible damage are often separated. We would inspect around hatches, windows, deck hardware, stanchions, chainplates, mast steps, and high-load fittings. Moisture readings are useful, but they need to be interpreted in context by someone who understands the construction method.

Rigging and Sails
Standing rigging age, terminals, chainplates, mast condition, spreaders, turnbuckles, running rigging, furlers, winches, travelers, and sail condition all matter. The difference between a rig that has documented recent replacement and one with uncertain history can be a major part of the real purchase cost.
Engines: Cold Start Matters
We want to see diesel engines before they have been warmed up. Cold starting can reveal issues that disappear once an engine is at operating temperature. We would watch starting behavior, smoke, vibration, charging output, cooling-water flow, idle quality, leaks, temperatures, and performance under load.
Hours alone do not determine condition. Maintenance quality, corrosion, cooling-system history, oil changes, injector service, mounts, exhaust systems, and accessibility all matter. A lower-hour engine that has sat neglected may be less attractive than a higher-hour engine with disciplined maintenance.
Electrical Systems
We would inspect the battery installation, cable sizes, fusing, shore-power equipment, AC panel, DC panel, inverter/charger, alternators, solar controllers, grounding/bonding where applicable, and signs of amateur modifications. Melted insulation, stacked lugs, unsupported wiring, corrosion, and unlabeled additions all deserve attention.
Plumbing, Heads, and Tanks
Freshwater pumps, tankage, hot water, heads, holding tanks, shower sumps, bilge pumps, macerators where installed, hose condition, and odor problems tell us a lot about how the boat has been maintained. We want every pump operated and every tank system understood.
The Sea Trial
The boat should be operated, not just admired. We want both engines run at meaningful load, steering checked through its range, autopilot tested, sails raised if conditions allow, electronics observed underway, and the boat listened to. Vibration, steering feel, engine temperatures, water ingress, unusual noises, and rig behavior matter.

Survey Findings Are Not All Equal
We expect findings. A survey with no findings would probably make us more suspicious than comfortable. The key is distinguishing routine used-boat maintenance from defects that materially change safety, value, insurance, or the size of the refit budget.
- Walk-away possibilities: serious structural uncertainty, major undocumented collision damage, pervasive system neglect, or a refit larger than the boat’s value justifies.
- Renegotiation items: major rigging replacement, engine problems, failed electronics, unsafe electrical work, leaking tanks, significant sail replacement.
- Normal ownership items: worn running rigging, pumps, hoses, cosmetic gelcoat, aging upholstery, routine service.
The Survey Is a Decision Tool
We are not looking for a perfect boat. We are looking for a boat whose problems are visible, understandable, and financially manageable. That is why survey day is less about passing or failing and more about replacing assumptions with evidence. Our catamaran buying checklist defines the priorities we want the survey to test.