What are you looking for?

Search sailing, scuba, gear reviews, treasure hunting, and Galley recipes.

Aerial view of the Mermet Springs scuba diving quarry in Belknap, Illinois

From Limestone Quarry to Dive Destination: The History of Mermet Springs

By Michael Bourg
October 1, 2026

Hidden in the hills of southern Illinois, Mermet Springs has one of the most unusual histories of any inland dive site in the Midwest. Before divers explored its walls, platforms, vehicles and famous Boeing 727, this was a working limestone quarry. Its story stretches from the 1950s stone industry to an abandoned flooded pit, a chance friendship, and the creation of a purpose-built scuba destination.

Aerial view of the Mermet Springs scuba diving quarry in Belknap, Illinois
Aerial view of Mermet Springs. Photo courtesy of Mermet Springs.

Before the Divers: A Southern Illinois Limestone Quarry

The history of Mermet Springs begins with limestone. Modern reporting based on interviews with founder Glen Faith dates quarrying at the pit that became today’s dive site to approximately 1956 through 1972. A separate historical record helps identify the industrial operator: a 1959 history of the Columbia Quarry Company states that the company acquired “the quarry at Mermet, Illinois” in 1957.

Columbia Quarry had been in business since 1905 and grew into a major southern Illinois limestone producer. Illinois Geological Survey records later list a Columbia Quarry Company “Mermet Quarry” northwest of Mermet and associate the operation with the Ste. Genevieve and St. Louis limestone formations.

There is an important historical wrinkle. Later geological records may describe a nearby or expanded part of the larger Mermet quarry operation rather than precisely the water-filled pit divers use today. That helps explain why the specific pit could have stopped operating around 1972 while a Mermet quarry operation continued to appear in later industrial records.

The best-supported version is that limestone extraction began at the future dive-site pit around 1956, Columbia Quarry acquired a Mermet quarry in 1957, and mining at the particular pit that became Mermet Springs ended around 1972. The identity of the operator immediately before Columbia’s 1957 acquisition remains less clear.

When the Quarry Went Quiet

When the quarrying stopped, the excavation filled with water. What had been an industrial work site became a deep, remarkably clear freshwater quarry. For years it remained private property, but local divers learned about it. Some reportedly entered without permission.

By the time Glen Faith discovered the quarry, the property was owned by Adley Schmidt. Faith took a different approach from the divers who had been sneaking onto the land: he went to Schmidt and asked permission.

Glen Faith Discovers Mermet

Faith came to southern Illinois to attend Southern Illinois University Carbondale, earning a degree in administration of justice in 1985. He later joined the Illinois Secretary of State Police and volunteered for the agency’s dive team beginning in 1987. Much of that work involved underwater search and recovery in the muddy rivers, ponds and creeks of southern Illinois.

A neighbor eventually told him about an abandoned quarry near Vienna where people sometimes went diving. When Faith saw the water, its clarity stood in stark contrast to the low-visibility environments he knew from public-safety diving.

Faith approached Schmidt for permission to dive the property. Schmidt agreed, and the two men became friends. Over time, Faith began imagining something much bigger than a private place to dive.

The Birth of Mermet Springs

Faith wanted to create a professional dive facility, but Schmidt was not ready to sell the property. Instead, they negotiated a long-term lease. That agreement became the foundation of Mermet Springs Inc. in 1996.

It took roughly another year to prepare the old quarry for regular divers. Early Mermet was far simpler than the facility visitors know today. The operation initially opened primarily on weekends and reportedly saw only around 10 to 12 people on a typical day.

Over the next three decades, Mermet Springs grew into a full-service training and recreational diving destination. Current Mermet Springs materials identify Glen and PJ Faith as owners.

The $1 Boeing 727

The attraction that made Mermet Springs famous began with a simple question: “Can we have the plane?”

Warner Bros. used a Boeing 727 during production of the 1998 movie U.S. Marshals, including the dramatic aircraft-crash sequence filmed in southern Illinois. Mermet Springs has said that filmmakers discussed using the quarry during production, although filming at the dive site itself did not materialize.

Faith met a Warner Bros. representative and asked what the studio planned to do with the aircraft when filming ended. When the representative was unsure, Faith asked if Mermet Springs could have it. After repeated requests, Warner Bros. agreed.

“I wrote the check, signed the agreement, and forwarded it to an address in Chicago.”

Glen Faith, recalling the $1 purchase in a Mermet Springs historical post

The purchase price was $1. Getting a 22-ton airliner from the Ohio River to a landlocked quarry was considerably more complicated.

Boeing 727 fuselage being transported on a barge on the Ohio River
The future Mermet Springs 727 traveling by barge on the Ohio River. Historical photo via Mermet Springs.

From the Ohio River to Joppa

After filming, a barge company in Metropolis, Illinois, helped move the aircraft to the small Ohio River town of Joppa. A barge-mounted crane was used during the move.

At Joppa, the 727 was cut into two sections so it could be transported over the road. The sections were placed on low-boy trailers provided by Industrial Trucking and Rigging of Marion, Illinois. Published accounts describe the overall move as involving a barge, two cranes, two low-boy trailers and police escorts.

Boeing 727 nose section arriving at Mermet Springs on a heavy-haul trailer
The Boeing 727 arrives at Mermet Springs after its trip from the Ohio River. Historical photo via Mermet Springs.
Heavy equipment positioning the Boeing 727 fuselage at Mermet Springs
Heavy equipment was needed to maneuver the 727 after it reached Mermet Springs. Historical photo via Mermet Springs.

How Do You Sink a Boeing 727?

Once the aircraft reached Mermet, Faith and his crew spent months preparing it. The two transported sections were rejoined, and the team created temporary running gear for the enormous fuselage.

A steer axle was placed beneath the front. The rear was supported on an I-beam fitted with semi wheels. Lift bags were configured so the aircraft could be controlled after entering the water and would roll into the intended upright position.

The crew built a ramp toward the quarry with a friend’s bulldozer, then constructed a wooden ramp over the soft mud and dirt to support the weight. A neighbor’s large farm tractor was used to back the aircraft into the quarry.

Crowd gathered at Mermet Springs as the Boeing 727 is prepared beside the quarry
Divers and visitors gather as the 727 is prepared beside the quarry. Historical photo via Mermet Springs.
Boeing 727 fuselage positioned on the shoreline at Mermet Springs before sinking
The reassembled 727 positioned beside the quarry before its final move underwater. Historical photo via Mermet Springs.

The plan worked. The airplane floated when it entered the quarry, allowing the crew to slowly lower and position it. According to Mermet Springs, the process took about three days. Photographic documentation associated with an SIU documentary project dates the final sinking to March 21, 1998.

Boeing 727 being backed into the water at Mermet Springs
The 727 entering the quarry during the carefully planned sinking operation. Historical photo via Mermet Springs.

Today the 727’s tail is around 15 feet deep while its nose lies approximately 45 to 50 feet below the surface, depending on water level and the source consulted. The fuselage is roughly 120 feet long and was prepared as a diver-accessible swim-through. Divers can see open hatches, missing wings and remnants of the movie damage, including the charred cockpit area.

There is a small date discrepancy in published versions of the story. A recent Mermet Springs throwback post described Warner Bros. filming in 1996, while other published accounts place the southern Illinois production work in 1997. The aircraft’s March 1998 sinking at Mermet is much better documented.

Building an Underwater Playground

The 727 became Mermet’s signature attraction, but it was only the beginning. Faith continued placing objects at different depths to give students and certified divers destinations for navigation, buoyancy practice, skill development and exploration.

Year Underwater attraction
1998 International semi truck
2001 Cessna aircraft
2002 Cessna 152
2004 Ambulance
2005 Railroad coal car
2006 Human-powered submarine
2007 Ford pickup truck
2008 Firetruck donated by the Quincy Fire Department
2010 Underwater divecache / geocache
Selected attraction timeline from Mermet Springs’ official attraction history.

The railroad car has its own unusual story. After a derailment near the quarry blocked the Mermet Springs entrance for several days, a 45,000-pound rail car was eventually given to the dive site. It was submerged in 2005 and now rests at about 55 feet.

The “submarine” is not a military relic. It is a human-powered pedal submarine originally created for a college competition. It was sunk in 2006 and now sits at roughly 60 feet.

A Quarry Designed for Training

What separates Mermet Springs from an ordinary abandoned quarry is the amount of infrastructure built specifically for divers. Mermet describes the water-filled quarry as approximately 8.5 acres. The facility includes easy-entry docks, a lift at the primary dock for divers with disabilities, numerous navigation lines and signs, and training platforms at approximately 5, 15, 20, 65, 85 and 100 feet.

Above water, the site developed around dive classes and groups with covered waterfront pavilions, heated showers, restrooms, equipment rental and repair, air and nitrox service, and on-site camping options.

The Fish Became Attractions Too

Mermet Springs is also known for its freshwater life—especially its enormous paddlefish, or spoonbills. These prehistoric-looking fish normally live in major river systems where underwater visibility can be extremely poor. In the clearer quarry environment, divers can get a rare look at them beneath the surface.

The paddlefish became notable enough to attract National Geographic. Biologist and Monster Fish host Zeb Hogan filmed at Mermet Springs, and the episode featuring the site’s paddlefish aired in 2013. The quarry has also become known for large catfish, including a distinctive albino catfish familiar to regular visitors.

Hollywood Came Back

The U.S. Marshals 727 is not Mermet’s only connection to filmmaking. In 2013, the independent film Dig Two Graves used Mermet Springs as a shooting location. Divers familiar with the quarry can recognize the rock walls at its north end, and a cabin used for the production was constructed and burned on the Mermet property.

Mermet Springs Timeline

  • c. 1956: Limestone quarrying begins at the pit that will become Mermet Springs.
  • 1957: Columbia Quarry Company records acquiring a quarry at Mermet, Illinois.
  • c. 1972: Mining at the future dive-site pit ends and the excavation eventually fills with water.
  • Late 1980s / early 1990s: Public-safety diver Glen Faith discovers the quarry and gains permission from owner Adley Schmidt to dive it.
  • 1996: Faith and Schmidt establish a long-term lease and Mermet Springs Inc. begins.
  • March 21, 1998: The former U.S. Marshals Boeing 727 is submerged.
  • 1998–2010: Vehicles, aircraft, a rail car, submarine and other attractions are added throughout the quarry.
  • 2013: National Geographic films the site’s paddlefish, and Dig Two Graves films on the property.
  • Today: Mermet Springs operates as a full-service scuba training and recreational diving facility.

Visiting Mermet Springs

Mermet Springs
6724 N US Highway 45
Belknap, Illinois 62908

Before traveling, check the official Mermet Springs site for current hours, water temperatures, visibility, entry requirements and the current quarry map.

More Than an Abandoned Quarry

It is easy to describe Mermet Springs as an abandoned quarry converted into a dive site. That is true, but it misses most of what makes the place interesting.

It began as part of southern Illinois’ limestone industry. After the stone operation ended, the flooded excavation sat quietly for years. Then a public-safety diver accustomed to searching muddy rivers saw clear water and imagined something completely different. A friendship with the landowner became a long-term lease. The lease became a dive business. A one-dollar Hollywood airplane became a massive engineering project. And an old industrial pit became a place where generations of divers have trained, explored and made their first open-water descents.

The Boeing 727 may be Mermet Springs’ most recognizable attraction, but the larger story is the transformation itself: from limestone quarry to one of the Midwest’s most distinctive scuba destinations.


Sources & Further Reading

Historical 727 photographs in this article were supplied from Mermet Springs material. Current aerial image courtesy of Mermet Springs. Historical dates have been cross-checked against official Mermet Springs material, contemporary reporting and quarry records; where sources disagree, the uncertainty is noted.

LET’S KEEP IN TOUCH!

We’d love to keep you updated with our latest news and offers 😎

We don’t spam! Read our privacy policy for more info.