What are you looking for?

Search sailing, scuba, gear reviews, treasure hunting, and Galley recipes.

OVOVFANY scuba diving dual split ring connector review graphic showing the connector attached to BCD webbing with a four-star rating.

OVOVFANY Dual Split Ring Connector Review: Two Years on My BCD

By Michael Bourg
October 3, 2026

Disclosure: As an Amazon Associate, Gypsea Bleu may earn from qualifying purchases. This review is based on my own long-term use of the product.

Small pieces of dive gear rarely get much attention, but a good attachment point can make a big difference in how organized your BCD feels underwater. I have been using the OVOVFANY 2-Pack Scuba Diving Dual Split Ring Connector with Snap Clips for about two years, primarily to attach small accessories to the webbing on my BCD.

After two years of diving with them, I still consider these simple connectors a useful addition to my setup. The hardware has held up well, I have not had any rust problems, and the red, white, and black dive-flag colors make them easy to spot against a dark BCD. There is one long-term drawback, though: the snap clasp has gradually become harder to open and close. That keeps this from being a five-star product for me.

Quick Verdict

My Rating: ★★★★☆ — 4 out of 5 stars

Price at time of publication (October 3, 2026): $19.99. Amazon prices can change, so check the link below for the current price and availability.

Amazon ASIN: B0DPPGGJX1

Best for: Divers who want an inexpensive, visible, corrosion-resistant attachment point for lights, whistles, gauges, small tools, lanyards, and other accessories on BCD webbing or D-rings.

Main drawback: After extended use, the snap clasp can become noticeably stiffer and require more effort to open and close.

Infographic summarizing a two-year scuba diving review of the OVOVFANY dual split ring connector, including pros, cons, care tips, and recommended uses.

What Is the OVOVFANY Dual Split Ring Connector?

The product is sold as a 2-pack of scuba diving dual split ring connectors with snap clips. The basic idea is simple: a snap clip attaches the connector to your BCD, D-ring, weight belt, float, boat, or another attachment point, while the split rings on the opposite end give you places to secure small pieces of gear.

According to the current Amazon listing, the snap clip and split rings are made from 316 marine-grade stainless steel. The connector uses double-stitched, 1-inch nylon webbing with a red-and-white dive-flag pattern. The listing specifically suggests using the rings for items such as a safety whistle, underwater camera, dive light, compass, gauges, or small tools.

  • Package: 2 connectors
  • Hardware: Manufacturer lists 316 marine-grade stainless steel
  • Attachment: Snap clip on one end
  • Accessory points: Dual split rings
  • Webbing: Double-stitched 1-inch nylon
  • Pattern: Red/white/black dive-flag design

How I Use It on My BCD

My main use for these connectors is attaching gear to the webbing of my BCD. That is where I think this design makes the most sense. Instead of trying to crowd several accessories onto a single D-ring, the connector creates an additional attachment point exactly where I want it.

The dual split rings also give you some flexibility. One ring can be used for the accessory itself while the other can hold a backup lanyard, small clip, whistle, light, or another compact item. For recreational diving, it is a simple way to keep frequently used accessories organized and accessible.

What Has Held Up Well After Two Years

No Rust So Far

The biggest positive for me has been corrosion resistance. Mine have been exposed to salt water over the past two years and I have not seen them rust. That is exactly what I want from hardware that stays attached to scuba gear.

I do want to separate my experience from the manufacturer’s specifications: the Amazon listing states that the metal hardware is 316 marine-grade stainless steel, while my contribution is simply that my own connectors have remained rust-free during normal use and care.

The Webbing Has Held Up Well

The short section of nylon webbing and its stitching have also held up well. I have not had an issue with the connector coming apart, and the webbing still feels substantial enough for the small accessories I use it with.

The Colors Are Easy to See

I also like the dive-flag color pattern more than I expected. Most BCDs, hoses, clips, and accessories are predominantly black. The red and white pattern stands out, which makes the connector easier to locate when I am looking down at my gear or reaching for an accessory.

The One Issue: The Clasp Has Become Stiffer

The reason I rate these 4 stars instead of 5 is the snap clasp. After about two years, mine has become harder to open and close than it was when new. It still functions, but the action is noticeably stiffer.

For a piece of hardware that is supposed to be operated around dive gear — sometimes while wearing gloves — smooth clip action matters. I would like to see the spring and gate remain easier to operate over a longer period of time.

This has not been enough of a problem for me to stop using the connector, but it is something I would inspect before each dive. If the clip ever becomes difficult enough that it cannot be operated reliably, I would replace it rather than depend on a marginal clasp.

Saltwater Care: Rinse It After Every Dive

If you use these in salt water, rinse them thoroughly in fresh water after the dive. That is one of the simplest things you can do to extend the life of small metal clips, springs, split rings, and other exposed hardware.

  1. Rinse the entire connector with fresh water after saltwater use.
  2. While rinsing, operate the snap clasp several times so fresh water reaches the moving surfaces.
  3. Allow it to dry completely before storing your BCD for an extended period.
  4. Inspect the gate, spring action, split rings, stitching, and webbing periodically.
  5. Replace the connector if the clip becomes unreliable, damaged, badly corroded, or difficult to operate.

I would not add oils or other lubricants to dive gear hardware unless the product manufacturer specifically recommends a compatible product and application. A freshwater rinse and regular inspection are the safest default maintenance habits.

What I Would Attach to It

For me, this is best treated as an accessory-management connector. Good uses include:

  • Dive lights and backup lights
  • Safety whistles
  • Compass or gauge retainers
  • Small camera accessories or lanyards
  • Surface marker buoy accessories
  • Small tools
  • Reef pointer or other compact accessories where appropriate
  • Backup clips and retainers

I would not treat this as a climbing-rated carabiner, lifting device, or life-safety connection unless a product is specifically certified and rated for that purpose. Its value on my setup is organizing lightweight scuba accessories, not supporting people or critical loads.

Who I Think It Is Best For

I would recommend this connector to recreational divers who want to add a few convenient attachment points to a BCD without making the setup complicated. It is especially useful if your BCD has plenty of webbing but not enough conveniently placed D-rings.

It also makes sense for divers who carry several small accessories and want a highly visible connection point. The red-and-white webbing is easy to identify, the split rings give you more than one attachment option, and my pair has proven durable enough for repeated use over two years.

Pros and Cons

Pros

  • Good overall build quality
  • No rust in my two years of use
  • Bright dive-flag colors stand out on a BCD
  • Dual split rings provide useful accessory attachment points
  • Compact and easy to add to existing webbing
  • Useful for a wide variety of small dive accessories

Cons

  • Snap clasp has become stiffer after long-term use
  • Moving hardware still requires freshwater rinsing and inspection after saltwater dives
  • Not something I would use as a load-bearing or life-safety connector

Final Verdict: 4/5 Stars

After roughly two years of using the OVOVFANY dual split ring connectors on my BCD, I am happy with how they have performed. They are simple, easy to see, versatile, and — most importantly for saltwater gear — mine have not rusted.

The clasp becoming harder to open and close over time is the main reason I would stop at 4 out of 5 stars. I still use them, and I would recommend them for organizing small accessories, but I would also make freshwater rinsing and regular clasp inspection part of the routine.

Gypsea Bleu Rating: ★★★★☆ — 4/5

Product specifications and suggested applications referenced above are based on the Amazon listing available at the time this review was written. My durability comments, four-star rating, clasp observations, and two-year experience are based on my own use.

LET’S KEEP IN TOUCH!

We’d love to keep you updated with our latest news and offers 😎

We don’t spam! Read our privacy policy for more info.