What are you looking for?

Search sailing, scuba, gear reviews, treasure hunting, and Galley recipes.

Pair of black Palantic scuba trim weight pockets with quick-release buckles.

Palantic Trim Weight Pockets Review: Two Years on My Scuba Tank

By Michael Bourg
October 3, 2026

Disclosure: As an Amazon Associate, Gypsea Bleu may earn from qualifying purchases. This review is based on my own real-world use of the product.

Trim-weight pockets are not exciting gear, but they can make a very noticeable difference in how a diver feels in the water. I have been using the Palantic Scuba Diving Trim Weight Pockets with Quick-Release Buckles for about two years, mounted on my tank as mid-level trim-weight pockets.

So far, they have done exactly what I wanted: they are easy to install, easy to remove, the material has held up, and after two years they are still going strong. My only complaint is cosmetic—I wish the PALANTIC name was not printed quite so boldly across the front.

Quick Verdict

Gypsea Bleu Rating: ★★★★★ — 5/5

Price at time of publication (October 3, 2026): $28.99. Prices can change, so check the Amazon link for current pricing and availability.

Amazon ASIN: B00VAZH0SE

Best for: Divers who want a simple pair of tank- or belt-mounted trim pockets for moving a few pounds of ballast away from the waist and improving trim.

Pair of black Palantic scuba trim weight pockets with quick-release buckles.

What They Are

These are compact scuba trim pockets designed to mount on a tank band or a weight belt. They are sold as a pair and are intended to let you reposition a small amount of ballast to improve weight distribution and in-water stability.

  • Sold as a pair
  • Designed for 2-inch / 5 cm webbing or weight belts
  • Tank-band or waist-belt mounting
  • Manufacturer-listed capacity of up to 5 lb per pocket
  • Approximately 6 x 5 x 1.5 inches externally
  • Approximately 5 x 4 x 1.5 inches internally
  • CORDURA fabric construction listed by the manufacturer
  • Quick-release buckle closure
  • Manufacturer part number SCWP-01

How I Use Them

I use these on my tank as mid-weight pockets. Moving some weight higher or more centrally on the cylinder can be a useful way to fine-tune trim instead of putting every pound around your waist or in the main integrated BCD pockets.

For my setup, they have worked very well. They are straightforward to get on and off, and the buckles make the pockets easy to access without turning the installation into a project every time I make a gear change.

Palantic scuba trim weight pockets mounted to scuba tank bands during a dive.

Durability After Two Years

This is the part I care about most with inexpensive accessory pockets. They spend their lives getting wet, exposed to salt, dragged through gear bins, squeezed by tank bands, and loaded with dense pieces of lead. Mine have now been in service for roughly two years and are still going strong.

The material has held up well, the attachment has remained dependable, and I have not had a meaningful failure with either pocket. That makes the relatively simple design a strength rather than a weakness.

Why Trim Pockets Can Help

Where you place weight matters, not just how much weight you carry. A diver who feels feet-heavy, head-heavy, or constantly fights a particular body position may benefit from relocating a small amount of ballast. Tank-mounted pockets give you another place to experiment without permanently changing the BCD.

They also give you flexibility if you switch exposure protection, cylinders, or other gear. You can move or remove the pockets as your configuration changes.

My One Complaint

I do not have a functional complaint. My only issue is the large PALANTIC branding on the flap. I prefer dive gear that is a little more understated, and I would personally like the same pocket with a smaller logo.

That is entirely cosmetic and does not affect how the pockets work, which is why it is not enough to reduce my rating.

Pros and Cons

Pros

  • Easy to mount and remove
  • Works well on tank bands for trim weight
  • Material has held up well
  • Still going strong after roughly two years
  • Up to 5 lb capacity per pocket according to the listing
  • Useful way to fine-tune weight distribution
  • Good value at the price I paid

Cons

  • No functional problem so far
  • Brand name is printed more boldly than I would prefer

Recommendations for Using Trim Pockets

  1. Start with small weight changes. Moving only a pound or two can noticeably affect trim.
  2. Make sure the tank band or webbing route is secure before entering the water.
  3. Check that the pocket cannot slide into a position that interferes with valves, hoses, or BCD hardware.
  4. Rinse the pockets and buckles in fresh water after saltwater dives.
  5. Inspect stitching, webbing, buckles, and attachment points periodically.
  6. Practice reaching and identifying your weight system so you understand which weights are ditchable and which are intended only for trim.

Final Verdict: 5/5 Stars

These are a straightforward piece of gear that has earned a permanent place on my setup. They are easy to use, easy to reposition, made from material that has held up well, and they have continued to do their job after two years of diving.

If you need a simple way to add tank-mounted trim weight without spending a lot of money, I have had an excellent experience with them.

Gypsea Bleu Rating: ★★★★★ — 5/5

LET’S KEEP IN TOUCH!

We’d love to keep you updated with our latest news and offers 😎

We don’t spam! Read our privacy policy for more info.